Used to modify the depiction of plates individually. At insertion, the plates obtain the settings that were made and thus can be overwritten individually.

Setting	Description
Layout	Here, you specify how the plate has to be depicted.
Holes	Here, you specify the depiction of drill holes.
Modeller	The component part is displayed by means of the facet-modeler. Normally, the software independently decides when the modeler has to be used for depiction. However, you can explicitly define it using this option. If the modeler has to be used, you cannot switch it off.
2D Display	A calculated 2D-depiction depending on the current view direction is displayed instead of standard 3D-depiction.
Grid	A plate grid is displayed on the upper side of the plate. This grid represents a gridiron or similar things.
Centerline	The centerline of the plate is displayed
Part Label	The object name will be displayed dynamic  at the object.
Short Name	The name of the component part is displayed dynamically at the part. The position depends on the angle of vision. The settings are made in the global settings.
Only view ports	The element names will be displayed in an activated and prepared view port.
ECS Axes	The Entity Coordinate System is displayed. It mainly serves for verifying purposes.