| Plate Thickness
|
Sets the thickness of the plates. Values may be
chosen from the list, or by entering a custom value.
|
| Grid
|
Defines if the Grid (Grating) should be created
instead of plates.
|
| Rotate Grids
|
Enabled for Grid. Rotates grating by 90°, changes
grid direction.
|
| Label
|
Assigns Label of the part. Part list data Name
value. Value can be chosen from a list, or custom value entered.
|
| Material
|
Assigns Material to the part.
|
| Description
|
Assigns Description to the part.
|
| Level
|
Assigns Level to the part.
|
| Display Class
|
Assigns Display class to the part.
|
| Area Class
|
Assigns Area class to the part.
|
| Part Family
|
Assigns Part Family to the part.
|
| Selection Set A
|
Tip:
Only one option each from the "Outer" and the "Inner" group can be enabled. The
radio button adjacent to the value field should be enabled in order to activate
the field.
Value entered will be applied to all plates placed on beams
from the Set A.
- Outer
- From
Outer Edge - Applies the offset to the Plates from the Outer Edge
of the outer beams.
- From
Inner Edge - Applies the offset to the Plates from the Inner Edge
of the outer beams.
- From
Center Out - Applies the offset to the Plates from the Center of
the outer beams.
- Outer
- From
Edges Equally - Applies the offset to the Plates Equally from the
Edges of the Inner Beams.
- From
Center Equally - Applies the offset to the Plates Equally from the
Center of the Inner Beams.
|
| A=B
|
When checked, values entered for the offsets in the
Selection Set A will be copied to the Selection Set B, disabling settings in
Set B.
|
| Selection Set B
|
Tip:
Only one option each from the "Outer" and the "Inner" group can be enabled. The
radio button adjacent to the value field should be enabled in order to activate
the field.
Value entered will be applied to all plates placed on beams
from the Set B.
- Outer
- From
Outer Edge - Applies the offset to the Plates from the Outer Edge
of the outer beams..
- From
Inner Edge - Applies the offset to the Plates from the Inner Edge
of the outer beams.
- From
Center Out - Applies the offset to the Plates from the Center of
the outer beams.
- Outer
- From
Edges Equally - Applies the offset to the Plates Equally from the
Edges of the Inner Beams.
- From
Center Equally -Applies the offset to the Plates Equally from the
Center of the Inner Beams.
|
