| Layout and Position
|
- Layout -
Selects the type of chamfer to be used:
Straight Chamfer,
Convex Chamfer, or
Concave Chamfer.
- Radius/1st edge
- Sets the radius at convex/concave version or the length of the first edge at
straight version.
- 2nd
edge - Sets the length of the second edge of the straight chamfer.
 (Swap
Values) - Used to swap the values between the first and second
chamfer edges. Clicking the icon switches the values in the dialog and on the
element being edited in the model.
(Chamfer plate) - Used to select the edges on a plate to
add a chamfers. The chamfer input fields are activated so you can change the
layout of the chamfer.
|
| Round Edges
|
- Radius - Sets
the round radius.
- Min.
radius - (Read only) Displays the minimum possible radius.
- Height - Sets
the height above the straight edge.
- Max.
height - (Read only) Displays the maximum possible height.
- (Round edge of
plate) - Used to select the edges on a plate to add a rounds. The
round edge input fields are activated so you can define the rounding off either
via the radius or via the height of the rounding above the straight edge.
|
