| Longitudinal Spacing
|
Settings for both Gusset Side / Support Side
Transverse Spacings:
- Number – Sets
the number of bolts to be placed on the
X axis.
- Edge
Distance (w1) – Sets the distance from the start of the shape to
the center of the first bolt.
- Distance
Between (w2) – Sets the distance between the center of the bolts in
longitudinal direction.
- Slot
Length – Sets the slotted hole distance along longitudinal
direction.
|
| Gusset Side / Support Side Transverse Spacing
|
- Number – Sets
the number of bolts to be placed on the
Y axis.
- Gause
Distance – Sets the distance from the edge to the center of the
first bolt.
- Distance
Between – Sets the distance between the center of the bolts.
|
| Brace Bolts
|
- Bolt
Type – Sets the bolt style from the drop-down list.
- Diameter – Sets
the hole diameter of the selected bolt from the drop-down list of bolt diameter
table.
- Workloose –
Sets the clearance between bolt and hole diameter.
- Additional
Length – Sets an additional length to the bolts extension outside
the nut.
- Flip – When
checked, the bolt direction is inverted. Available when not welded.
- Weld – When
checked, the shapes are welded, instead of bolting.
Note: When set
to Weld, disables the Bolts and Spacing settings.
|
