| Longitudinal Spacing - Top / Bottom
|
- Number of
Shape Direction – Sets the number of bolts in shape direction.
- Edge
Distance Outside – Sets the projection of the splices beyond the
last bolt.
- Edge
Distance Inside – Sets the distance from the starting point of the
shape to the first bolt.
- Distance
Between – Sets the inner distance from one bolt to the other.
|
| Transversal Spacing - Top / Bottom
|
- Number
Transversal – Sets the number of bolts transversal to the shape
direction.
- Edge
Distance Outside – Sets the distance of the plate beyond the
outmost bolts.
- Inner
Distance – Sets the distance from one bolt to the other.
- Distance
Between – For more than 2 bolts in transversal direction, this
value sets the distance from one outer bolt to the other.
|
| Thickness - Top / Bottom
|
- Thickness –
Sets the splice plate thickness from the drop-down list. If you have activated
the free selection option, you can enter this value directly.
The thickness is effective for Flange plates only.
- Vertical
Offset – Sets offset of the plate to the shape center. The offset
moves the splices in transversal direction to the shape.
|
| Welding
|
- Welding – When
checked, no bolts and drill holes will be inserted, but the parts will be
welded with each other. Length settings are still valid.
 (Edit Style) – Opens
the Weld Styles dialog, where welding styles are manipulated.
- Length – Sets
the length of the splice to be welded.
- As – Sets the
desired value for the weld thickness, overriding the default weld style
thickness.
- Weld
Style – Displays the weld style to be used, one selected from the
drop-down list.
|
