Element Modification - Options tab

Setting	Description
Multiple object selection	Cut at line - You can cut several parts simultaneously at one line without having to select the function once again. Cut at part - You can cut several parts simultaneously at another part without having to select the function once again. Divide - You can divide several parts simultaneously without having to select the function once again. Polycuts - You can cut an object simultaneously at several poly-lines without having to select the function once again.
Execute in loop	Cut at line - The "Cut at Line" command is repeated until it is explicitly interrupted. Cut at part - The "Cut at part" command is repeated until it is explicitly interrupted. Divide - The "Divide" command is repeated until it is explicitly interrupted. Connect - The "Combine Shape" command is repeated until it is explicitly interrupted. Shorten - The "Shorten Shape" command is repeated until it is explicitly interrupted. Lengthen - The "Extend Shape" command is repeated until it is explicitly interrupted. Polycuts - The "Polygonal Cut-Outs" command is repeated until it is explicitly interrupted. Miter cuts - The "Mitred Cut" command is repeated until it is explicitly interrupted. Insert corner - The "Insert Corner" command is repeated until it is explicitly interrupted. Delete corner - The "Delete Corner" command is repeated until it is explicitly interrupted. Place Chamfer - The "Place Chamfer" command is repeated until it is explicitly interrupted. Round Edge - The "Round Edge" command is repeated until it is explicitly interrupted.
End dialog automatic	When on, the dialog is immediately closed after an action. Note: When off, you must exit manually, but can not immediately select another command.

Multiple object selection

Cut at line - You can cut several parts simultaneously at one line without having to select the function once again.
Cut at part - You can cut several parts simultaneously at another part without having to select the function once again.
Divide - You can divide several parts simultaneously without having to select the function once again.
Polycuts - You can cut an object simultaneously at several poly-lines without having to select the function once again.

Execute in loop

Cut at line - The "Cut at Line" command is repeated until it is explicitly interrupted.
Cut at part - The "Cut at part" command is repeated until it is explicitly interrupted.
Divide - The "Divide" command is repeated until it is explicitly interrupted.
Connect - The "Combine Shape" command is repeated until it is explicitly interrupted.
Shorten - The "Shorten Shape" command is repeated until it is explicitly interrupted.
Lengthen - The "Extend Shape" command is repeated until it is explicitly interrupted.
Polycuts - The "Polygonal Cut-Outs" command is repeated until it is explicitly interrupted.
Miter cuts - The "Mitred Cut" command is repeated until it is explicitly interrupted.
Insert corner - The "Insert Corner" command is repeated until it is explicitly interrupted.
Delete corner - The "Delete Corner" command is repeated until it is explicitly interrupted.
Place Chamfer - The "Place Chamfer" command is repeated until it is explicitly interrupted.
Round Edge - The "Round Edge" command is repeated until it is explicitly interrupted.

End dialog automatic

When on, the dialog is immediately closed after an action.

Note: When off, you must exit manually, but can not immediately select another command.