Dispatch Cells - Database tab
Further Options and Data Base: As it is the case with many other OpenBridge Modeler functions, here too it is possible to make some standard default settings directly under ‘Assignment’ for the component parts to be inserted.
| Setting | Description |
|---|---|
| Database | Sets the database to be used for cells. |
| Units | Sets the length units from the drawing; selectable options are Metric or Imperial. |
| In Part list | When checked, the component parts are seized for the parts list. |
Data Base Definition
You can define a database with pre-defined thread bolts resp. paths to the cells before you can optimally utilize the distribution command. Any thread bolts or cells indicated there are then displayed in the selection list. This DBASE-file (e.g., bolts.dbf) has to be indicated in the configurations.
Meaning of the Data Base Fields
| Setting | Description |
|---|---|
| TYPE | indicates the entry type (1 = thread bolt, 2 = cell) |
| NAME | name of the thread bolt or cell |
| BLOCKPATH | complete path to the cell (only for type 2) |
| HOLEDESCRI | drill hole code (only for type 2) |
| HOLEDM | diameter of marking hole |
| HOLELENGTH | depth of marking hole |
| LENGTH | length of thread hole (only for type 1) |
| DM | diameter of thread hole (only for type1) |
| FOOTDM | diameter of thread hole foot (only for type1) |
| FOOTHEIGHT | height of thread hole foot (only for type1) |
| HEADDM | diameter of thread hole head (only for type1) |
| HEADHEIGHT | height of thread hole head (only for type1) |
| NIPPELDM | diameter of thread hole nipple (only for type1) |
| NIPPELLENG | length of thread hole nipple (only for type1) |