Layout
Used to modify the display of shapes individually. At insertion, the shapes obtain the settings that were made and can be overwritten individually.
| Setting | Description |
|---|---|
| Layout | Here, you specify how the shape has to be depicted. |
| Holes | Here, you specify the depiction of drill holes. |
| Only Outer Cont. | Only the first outer contour is displayed. At tubes, e.g., the inner cylinder will not be displayed. |
| 2D Display | A calculated 2D-depiction depending on the current view direction is displayed instead of standard 3D-depiction. |
| Center Line | The centerline of the shape is displayed. |
| COG Line | The gravity line is displayed. |
| Pitch Lines | If crack lines have been defined for this shape, they are displayed. |
| Part Label | The name of the component part is displayed dynamically at the part. The position depends on the angle of vision. The settings are made in the global settings. |
| Short name | If a short position has been filed in the database; it will be used instead of the complete name. |
| Only view ports | When checked, displays the element names in an activated and prepared view port. |
| ECS Axes | The Entity Coordinate System is displayed. It mainly serves for verifying purposes. |
| Transparency | The part is displayed transparent at shading. |
| Direction marker | If the component part has got a benchmark during detailing, this will be displayed. |
| 2D-Section | Automatic 2D cut information is displayed. |