C1 Baseplate - Corner tab

Used to define gusset plates at the corners of the selected shape.

The plates are either Vertical Corner or Horizontal Corner.

Setting	Description
Vertical Corner	Vertical Corner – When checked, creates plates normal to the base plate in a direction parallel to the cross-sectional Y axis of the shape selected at the corners of the selected shape. Length – Sets the plate dimension in a direction parallel to the width of the base plate. A positive value determines the length. A negative value is not permitted. A value of 0 sets the length to the width of the base plate. The default is 0. Thickness – Sets the gusset plate thickness. A positive value determines the thickness. A negative value of value of 0 is not permitted. The default is 8 or 0.25 depending on the units setting. Chamfer Horiz. / Vert. – Sets the horizontal / vertical dimension for the chamfer on the plate. A positive value determines the chamfer size. A negative value is not permitted. A value of 0 for either Chamfer Horz. or Chamfer Vert. indicates no chamfer is to be created. The default is 20 or 0.75 depending on the units setting. Height – Sets the plate dimension in a direction parallel to the normal of the base plate. A positive value determines the height. A negative value or a value of 0 is not permitted. The default is 100 or 4 depending on the units setting. Offset – Sets the offset dimension from the corner of the shape selected to the gusset plate. A positive or negative value to determines the offset from the flange of the selected shape to the inside face of the plate. A value of 0 indicates no offset. The default is 0.
Horizontal Corner	Horizontal Corner – When checked, creates plates normal to the base plate in a direction parallel to the cross-sectional Y axis of the shape selected at the corners of the selected shape. Length – Sets the plate dimension in a direction parallel to the length of the base plate. A positive value determines the length. A negative value is not permitted. A value of 0 sets the length to the width of the base plate. The default is 0. Thickness – Sets the gusset plate thickness. A positive value determines the thickness. A negative value of value of 0 is not permitted. The default is 8 or 0.25 depending on the units setting. Chamfer Horiz. / Vert. – Sets the horizontal / vertical dimension for the chamfer on the plate. A positive value determines the chamfer size. A negative value is not permitted. A value of 0 for either Chamfer Horz. or Chamfer Vert. indicates no chamfer is to be created. The default is 20 or 0.75 depending on the units setting. Height – Sets the plate dimension in a direction parallel to the normal of the base plate. A positive value determines the height. A negative value or a value of 0 is not permitted. The default is 100 or 4 depending on the units setting. Offset – Sets the offset dimension from the corner of the shape selected to the gusset plate. A positive or negative value to determines the offset from the flange of the selected shape to the inside face of the plate. A value of 0 indicates no offset. The default is 0.

Setting

Description

Vertical Corner

Vertical Corner – When checked, creates plates normal to the base plate in a direction parallel to the cross-sectional Y axis of the shape selected at the corners of the selected shape.
Length – Sets the plate dimension in a direction parallel to the width of the base plate. A positive value determines the length. A negative value is not permitted. A value of 0 sets the length to the width of the base plate. The default is 0.
Thickness – Sets the gusset plate thickness. A positive value determines the thickness. A negative value of value of 0 is not permitted. The default is 8 or 0.25 depending on the units setting.
Chamfer Horiz. / Vert. – Sets the horizontal / vertical dimension for the chamfer on the plate. A positive value determines the chamfer size. A negative value is not permitted. A value of 0 for either Chamfer Horz. or Chamfer Vert. indicates no chamfer is to be created. The default is 20 or 0.75 depending on the units setting.
Height – Sets the plate dimension in a direction parallel to the normal of the base plate. A positive value determines the height. A negative value or a value of 0 is not permitted. The default is 100 or 4 depending on the units setting.
Offset – Sets the offset dimension from the corner of the shape selected to the gusset plate. A positive or negative value to determines the offset from the flange of the selected shape to the inside face of the plate. A value of 0 indicates no offset. The default is 0.

Horizontal Corner

Horizontal Corner – When checked, creates plates normal to the base plate in a direction parallel to the cross-sectional Y axis of the shape selected at the corners of the selected shape.
Length – Sets the plate dimension in a direction parallel to the length of the base plate. A positive value determines the length. A negative value is not permitted. A value of 0 sets the length to the width of the base plate. The default is 0.
Thickness – Sets the gusset plate thickness. A positive value determines the thickness. A negative value of value of 0 is not permitted. The default is 8 or 0.25 depending on the units setting.
Chamfer Horiz. / Vert. – Sets the horizontal / vertical dimension for the chamfer on the plate. A positive value determines the chamfer size. A negative value is not permitted. A value of 0 for either Chamfer Horz. or Chamfer Vert. indicates no chamfer is to be created. The default is 20 or 0.75 depending on the units setting.
Height – Sets the plate dimension in a direction parallel to the normal of the base plate. A positive value determines the height. A negative value or a value of 0 is not permitted. The default is 100 or 4 depending on the units setting.
Offset – Sets the offset dimension from the corner of the shape selected to the gusset plate. A positive or negative value to determines the offset from the flange of the selected shape to the inside face of the plate. A value of 0 indicates no offset. The default is 0.