Beam Clamp Connection - Connection tab

Used to create bolts through the holes in the clamp plates in four positions.

Setting	Description
Bolt Settings	Create – When checked, enables creating bolts. Bolt Style – Sets the bolt type from the installed bolt database's. Select the required bolt type from the list. The default is the first type in the list. Diameter – Sets the diameter of the holes in the clamp plates. Enter a positive value to determine the diameter. Default is 16 or 0.625 depending on the units setting. Workloose – Sets the allowance for the hole workloose for the hole in the gusset plate. Enter a positive value to determine the workloose. Default is 2 or 0.0625 depending on the units setting.

Setting

Description

Bolt Settings

Create – When checked, enables creating bolts.
Bolt Style – Sets the bolt type from the installed bolt database's. Select the required bolt type from the list. The default is the first type in the list.
Diameter – Sets the diameter of the holes in the clamp plates. Enter a positive value to determine the diameter. Default is 16 or 0.625 depending on the units setting.
Workloose – Sets the allowance for the hole workloose for the hole in the gusset plate. Enter a positive value to determine the workloose. Default is 2 or 0.0625 depending on the units setting.