To apply Fudge to Main Bars

Click the Fudge Rebar tool (Concrete > Drawing Production > 2D Rebar > Fudge Rebar).

Select the Bar leg.

The Fudge Rebar dialog opens.

Select the Type of Fudge.

Single Leg Fudge: Select the bar leg to be Fudged.

or

Whole bar Fudge: Select the bar leg perpendicular to direction of fudge.

Select Methods of Fudge.

Dynamics: Move the bar to required position on screen and accept the new position of bar using left click. Dialog remains opened after applying the Fudge and you can apply fudge to other bars. Right click to close the dialog box.

or

Distance: Specify the distance of the Bar and click left. You can move the bar in the desired direction and accept the position by using left click.

or

Bar Size: Specify the Bar Multiplier value and click left. Move the bar to desired direction and accept the position by using left click.

Example- For Bar #15M, bar size is 16 mm. If Bar Multiplier value is 5 then Fudge distance will be 16 x 5 = 80 mm

Rotate: Rotates the bar leg in specified direction.

Resets the bar to its original position.