| Main
|
- Shorten
Shape – Sets the length to be cut on the first shape. A positive
value determines the length. A negative value will extended the first shape
towards the second shape. The default is 0.
- Overlap
Length – Sets the overlap dimension of the joint along the shape
direction. A positive value determines the length. A negative value will be
read as its absolute value. The default is 50 or 2 depending on the units
setting.
|
| Web Cut
|
When checked, enables creating web cut.
- Cut
Radius – Sets the dimension of a poly-cut on the web of the
selected shape. A positive value determines the cut radius. A negative value of
value will be read as its absolute value. The default is 30 or 1.2 depending on
the units setting.
|
| Options
|
-
Group – When checked, the selected shape, plate and other created
objects are arranged to form a group. If the selected shape is already part of
an existing group then the created objects are added to that group.
|
| Options
|
- Form
Group – When checked, the selected shape, plate and other created
objects are arranged to form a group. If the selected shape is already part of
an existing group then the created objects are added to that group.
|
| Weld Plate
|
When checked, enables creating weld plate.
- Create
Plates – When checked, creates web plates.
- Thickness –
Sets the weld plate thickness. A positive value determines the thickness. A
negative value will be read as its absolute value. The default is 10 or 0.4
depending on the units setting.
- Length – Sets
the weld plate length. A positive value determines the length. A negative value
is to be read as its absolute value. A value of zero will make the length match
the width of the selected shape. The default value is 0.
- Width – Sets
the dimension (width) of the weld plate along the shape direction. A positive
value determines the width. A negative value is to be read as its absolute
value and a value of 0 is not permitted. The default is 40 or 1.6 depending on
the units settin.
|
