Stairs - Base Flight tab
Used to set overall dimensions and positioning of the base flight.
| Setting | Description |
|---|---|
| Width | Sets the width of the staircase across outer edge. |
| Length | Sets the entire length of the stair construction. |
| Height | Sets the height of the staircase from starting point to upper edge stair head. |
| Thickness | Sets the thickness of the staircase. |
| Riser | Sets the desired rise per step of the staircase. |
| Actual Riser | Displays the resulting exact rise of the steps; calculated based on the Riser value. |
| Angle | Displays the resulting gradient of the staircase. |
| Tread | The resulting exact treading depth of the steps; the calculated going of the stair. |
| Riser Count | Displays the resulting number of steps. The count is dependent of Height and/or Riser value. |
| Lower Landing Length | Sets the length of the lower landing. |
| Upper Landing Length | Sets the length of the upper landing. |
| Position | Sets the side of the wall to place the stair at leader line; selected from the available options: Top, Middle or Bottom. |