NC Data - Data - Text Stenciling-SI tab
| Setting | Description | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Write Signature | When checked (default), the text signature (i.e.,
part identification) are added to the face of the part in the output file.
If not checked, then the text signature is not added to the output file and the controls are disabled. |
||||||||||||||||||
| Text | Shows and expression for the part signature or
identification to be written in the output file.
You can change the expression by
using the
expression builder.
Default value: %Position Number% |
||||||||||||||||||
| Text height | The text height of the part name written on the main
part.
Default value: 1/4" (Imperial Units), 5mm (Metric units) |
||||||||||||||||||
| Text on Member Profile | Used to set the parameters associated with the signature text placement on the member profile. | ||||||||||||||||||
| Profile Code | Select the profile for which you want to change the
placement and alignment settings.
Default value: I Profile. The preview to the right of the selection list updates to show the profile shape / cross-section (with profile face marking) for the selection. |
||||||||||||||||||
| Reset |
Resets the text placement (i.e., faces) on the selected profile to default (i.e., according to DSTV specification). |
||||||||||||||||||
| Placement | Select a face on which the signature is placed from
the drop-down list.
Default value: O - Top face (for i Profile) |
||||||||||||||||||
| X / Y position | Specify the X and Y position (distance in the X and
Y axes, respectively) of the text location on the selected profile face.
Default value: 1/4" (Imperial Units), 5mm (Metric units) |
||||||||||||||||||
| Angle | Specify the angle of rotation (in degrees) by which the text can be placed on the selected profile face. | ||||||||||||||||||
| Reset All | Resets all control to default values (i.e., according to DSTV specification). |