Pipe Flange Connection - Dimension tab

Setting	Description
Dimension	Thickness – Sets the thickness of the Flange Plate. Rim Size / Radius – Sets the radius of the flange. Offset from Edge/ Center – Determines whether the Rim Size is to calculated from the edge or the center of the selected shape. Shape Size as Diameter – When checked, the diameter of the selected shape is set as the center hole diameter. Clearance / Center Hole Diameter – Sets the clearance of the hole at the center of the flange. Center Hole Diameter appears in place of Clearance when the Shape Size as Diameter is unchecked. Pipe Insertion – Sets the insertion of the pipe into the plate. The pipe may not be inserted beyond the thickness of the plate. Negative values are not accepted. Group – When checked, the entire connection, including the connecting shape, is assigned to a construction group. If the shape is already part of another component group, the connection will be assigned to the same group. With Bolts - When checked, the bolts are also added to that group. Shift Split Point – Shifts the split point by the specified value. Change Orientation – When checked, changes the orientation of flange connection. Rotation Angle – Sets the angle of rotation. Single End Flange – When checked, the adds flange with single end.
Bolts	Num. of Bolts – Sets the number bolts. Bolt Type – Sets the bolt type selected from the drop-down list. Turn – When checked, the bolt direction is inverted. Diameter – Sets the diameter of the bolt. Work Loose – Sets the hole tolerance. Additional Length – Sets the length of the bolt beyond the nut. Bolt Circle – Sets the radius for the bolts. Offset form Edge/ Center – Determines whether the Bolt Circle is to calculated from the edge or the center of the selected shape. Weld – When checked, the shapes are welded. Disables bolts settings.
Stiffeners	Num. of Stiffeners –Indicates the number of stiffeners. Always equal to the number of bolts, unless Weld is checked. Length – Sets the longitudinal length of the Stiffeners. Thickness – Sets the thickness of the Stiffeners. Rim Edge Offset – Sets the offset from the outside edge of the flange. Base Length – Sets the distance from the plate's surface to the bevel edge. Base Width – Sets the distance from the pipe's outside surface to the bevel edge. Side 1/ Side 2 / Both – Determines the placement of the Stiffeners.

Dimension

Thickness – Sets the thickness of the Flange Plate.
Rim Size / Radius – Sets the radius of the flange.
Offset from Edge/ Center – Determines whether the Rim Size is to calculated from the edge or the center of the selected shape.
Shape Size as Diameter – When checked, the diameter of the selected shape is set as the center hole diameter.
Clearance / Center Hole Diameter – Sets the clearance of the hole at the center of the flange.
Center Hole Diameter appears in place of Clearance when the Shape Size as Diameter is unchecked.
Pipe Insertion – Sets the insertion of the pipe into the plate. The pipe may not be inserted beyond the thickness of the plate. Negative values are not accepted.
Group – When checked, the entire connection, including the connecting shape, is assigned to a construction group. If the shape is already part of another component group, the connection will be assigned to the same group.
With Bolts - When checked, the bolts are also added to that group.
Shift Split Point – Shifts the split point by the specified value.
Change Orientation – When checked, changes the orientation of flange connection.
Rotation Angle – Sets the angle of rotation.
Single End Flange – When checked, the adds flange with single end.

Bolts

Num. of Bolts – Sets the number bolts.
Bolt Type – Sets the bolt type selected from the drop-down list.
Turn – When checked, the bolt direction is inverted.
Diameter – Sets the diameter of the bolt.
Work Loose – Sets the hole tolerance.
Additional Length – Sets the length of the bolt beyond the nut.
Bolt Circle – Sets the radius for the bolts.
Offset form Edge/ Center – Determines whether the Bolt Circle is to calculated from the edge or the center of the selected shape.
Weld – When checked, the shapes are welded. Disables bolts settings.

Stiffeners

Num. of Stiffeners –Indicates the number of stiffeners. Always equal to the number of bolts, unless Weld is checked.
Length – Sets the longitudinal length of the Stiffeners.
Thickness – Sets the thickness of the Stiffeners.
Rim Edge Offset – Sets the offset from the outside edge of the flange.
Base Length – Sets the distance from the plate's surface to the bevel edge.
Base Width – Sets the distance from the pipe's outside surface to the bevel edge.
Side 1/ Side 2 / Both – Determines the placement of the Stiffeners.