| Concrete Cover
|
Sets the dimension from the edge of concrete to the
closest rebar (Top, Bottom, and Side values).
|
| Top Rebar / Bottom Rebar
|
When checked, enables adding top / bottom bars.
Both
Long Way and
Short Way bar details can be set.
- Qty – Sets the
quantity of the selected bars.
- Bar
Size – Sets the size of the bar selected from the drop-down list.
- U-Bar
– Check whether you want the Top or Bottom bars to
be U-Bars.
- Spacing
– Sets the distance between bars in the X and Y
direction.
- Start /
End Offset – Sets the distance between bars in the X and Y
direction.
- Above – When
checked, toggles to position whichever bars are on top the Y-direction bars or
X-direction bars, only one can be checked.
Note: A cover to the side of the bar is only honored
when offset is 0.0. Otherwise 'side' cover indicates the cover to the bar ends
only. Offsets are calculated to the centerline of the bars when they are not
0.0.
|
| Side Rebar
|
When checked, enables adding side bars.
|
