OpenBridge Modeler

RebarSet-Single - Main Reinforcing tab

Used to define the control bars in both directions for a single RebarSet.

Concrete Cover Sets the concrete clear cover for the Vertical Offset, Side, and Centered.
  • Vertical Offset – Select the vertical offset distance from the list.
  • Side – Select the clear cover along the sides of the RebarSet.
  • Centered – Set this option to center the RebarSet in through the depth of the selected concrete element.
Insert Sets the insert method:
  • By Defined/Selected Smartline
  • By Concrete
Single Rebarset Define the Rebar used in both the Horizontal and Vertical directions for this RebarSet (layer of reinforcement). Checked, by default.
  • – Switches the rebar parameters between sides of the RebarSet.
  • Bar Size – Sets the bar size (and steel grade) in this direction selected from the drop-down list.
  • Layout – Sets how the series of bars is aligned from the list. See Understanding Spacings.
  • Spacing Description – When checked, enables setting in variable spacing values -the formula that defines the spacing between rebar. See Understanding Spacings.
  • Spacing – Sets the regular center-to-center distance between consecutive bars.
  • Start / End Offset – Sets the distance from the end of the rebar to the edge of your concrete shape.
  • Below (Above) – When checked, sets the direction of bars which are located nearest the face or Above the other for Centered bars.