OpenBridge Modeler

To add the bridge

To add the bridge to the project, do the following.

  1. On the Home ribbon tab, select the Add Bridge tool in the Bridge Setup group.


  2. In the Add Bridge tool settings dialog, select Segmental from the Bridge Type drop-down list.
  3. Data point on the alignment.
  4. Data point again to accept the default bridge name, BR1.
  5. On the Home ribbon tab, select the Terrain tool in the Bridge Setup group.


  6. Data point on the terrain in the view window.

You can review the bridge data to see that the alignment and terrain you have created are being used. Select the Bridge Data tab in the Project Explorer window and then expand the entry for Bridges > Bridge(BR 1).