To assign superelevation section to a bridge deck,
use the following procedure.
The bridge deck or
segmental deck must have the superelevation flag on for the sloped points.
The bridge deck must be placed prior to assigning
The superelevation section
added as a reference
or added to the
OpenBridge Modeler file using the
tool on the
Civil ribbon tab.
Home ribbon tab, select the
Assign Superelevation tool in the
Data point on the superelevation section to use for the bridge
Data point on the bridge deck.
Seperelevation Assignment dialog
The superelevation is applied to the selected