Surface by Revolution

Used to create a surface of revolution — a complex 3D element that is generated by rotating a profile element (line, line string, arc, ellipse, shape, complex chain, complex shape, or B-spline curve) about an axis of revolution.

You can access this tool from the following:

Ribbon: Modeling > Surfaces > Create Surfaces > Revolve Surface > Revolve
Toolbox: Create Surfaces

Setting	Description
Axis	Sets the direction of the axis of revolution. Points (AccuDraw) — Direction of axis is defined graphically. AccuDraw can be used to define the drawing plane on which the points are placed. Screen X, Y, or Z — Direction of the axis is set to the screen's X, Y, or Z axis. Drawing X, Y, or Z — Direction of the axis is set to the drawing's, or design file's, X, Y, or Z axis.
Angle	Sets the rotation angle.
Thickness	(Only available when Parametrics is enabled.) Sets the wall thickness when a solid or a surface, with thickness is required. None - Disables the Thickness setting. Inside - The thickness is protruded on the inside face of the extrusion. Outside - The thickness is protruded on the outside of the extrusion. Center - The thickness is equally protruded on both faces of the extrusion, with respect to the value entered for thickness.
Variable Link	Let's you use an existing variable to set the input value, defined in the Variables dialog. Note: If no variables exist, you will be alerted to create one first.
Use Active Attributes	If on, the surface of revolution is created with the element using the active attributes. If off, the surface of revolution is created with the element taking the attributes of the profile element.
Keep Original	If on, the original profile element is kept in the design.
Parametric	If on, a parametric surface is created with the profile as an input element. The profile can be handled like other feature inputs, allowing you to show /hide, apply constraints, replace etc.

Key-in: CONSTRUCT SURFACE REVOLUTION