| Axis |
Sets the direction of the axis of revolution.
- Points — Direction of axis is defined graphically. AccuDraw can be used to define the drawing plane on which the points are placed.
- Screen X, Y, or Z — Direction of the axis is set to the screen's X, Y, or Z axis.
- Drawing X, Y, or Z — Direction of the axis is set to the drawing's, or design file's, X, Y, or Z axis.
|
| Primary Radius |
If on, sets the primary radius (the one the torus' profile is swept around). |
| Secondary Radius |
If on, sets the secondary radius (the radius of the torus' profile). |
| Angle |
If on, sets the sweep angle. |
(3D only) Used to place a torus (a donut-shaped surface or solid).
