To Place a Right Elliptical Cone Surface Using AccuDraw
-
Select the Elliptical Cone Surface tool (
).
-
Set Axis to Points (AccuDraw).
-
Turn on Orthogonal.
-
Enter a data point to define the center of the base.
-
Enter a data point to define the primary radius for the base.
-
Enter a data point to define the secondary radius for the base.
-
Enter a data point to define the height of the elliptical cone.
-
Enter a data point to define the primary radius for the top.
-
Enter a data point to define the secondary radius for the top.
