To Edit an Existing Parameter Set for Hole Features

From the DGNLib file that has the parameter set, type paramset table export hole.
The Export Parameter Set Table dialog opens.
Select a folder and file name for the CSV file.
Use a text editor, or import the file into a spreadsheet, to edit the information.
Save the file again as a CSV file.
Import the CSV file into a DGNLib file using the key-in paramset table import hole.
The Import Parameter Set Table dialog opens, which lets you select a CSV file to import.

CAUTION: When you create or edit a CSV file, the correct syntax for variable names is required. The table following shows the names of the variables and their equivalent labels on the Hole Feature tool dialog.

Variable Name in CSV file	Variable Type	dialog label	Values	Tool Setting
Name	String	Parameter Set	.	.
HoleType	Integer	Hole Type	0 1 2	Simple Counterbore Countersink
DrillType	Integer	Drill	0 1 2	Through Blind Next Face
WhichEnd	Integer	Cbore or Csink End	0 1 2	First Face Last Face Both
Threaded	Integer	Add Thread	0 1	Disabled Enabled
Depth	Distance	Depth	.	.
Diameter	Distance	Diameter	.	.
CDiameter	Distance	Cbore or Csink Diameter	.	.
CAngle	Angle	Csink Angle	.	.
CDepth	Distance	Cbore Depth	.	.
DraftAngle	Angle	Draft Angle	.	.
Tapped	Integer	Drill Angle	0 1	Disabled Enabled
TapAngle	Angle	Drill Angle (field)	.	.
ThreadDiameter	Distance	Thread Dia (field)	.	.
ThreadDepth	Distance	Thread Depth	.	.
ThreadPitch	Distance	Thread Pitch	.	.