To Install MicroStation
-
In an Explorer window, double-click the
MicroStation setup executable.
The MicroStation Installation Wizard opens and checks if the required Windows KBs are installed on your machine. If not, you will get an error message with a link to know more about Windows KBs and download them. MicroStation can be installed only after you install the required Windows KBs.
-
To read the End-User Licensing Agreement (EULA), click
the Licensing Terms link.
The End-User Licensing Agreement opens in a web browser.
-
After reading the license agreement, turn on the
I accept the End User Licensing Terms check
box if you understand and agree to the License Agreement Terms and Conditions.
Note that agreeing to the license agreement is required in order to install the product. Turning on the check box displays the Cancel and Install buttons at the bottom of the wizard.
- Click Install.
- Click Finish.
- (Optional)
To make changes to the default
MicroStation Configuration:
- Click the Configure button next to CONNECT Edition CONNECT Edition. The Application Install Location page opens.
-
To change the path where
CONNECT Edition is installed, click
theBrowse button next to the
Application Path field.
In the Browse For Folder dialog that opens, browse to the drive and folder where you want to install MicroStation, then click OK.
- (Optional) To install Descartes for MicroStation as a Companion Feature, turn on the Descartes check box.
- (Optional)
To install LumenRT
CONNECT Edition as a Companion Application,
do the following:
- Turn on the Bentley LumenRT CONNECT Edition check box.
- (Optional)
Click the
Configure button next to the check box.
The Installer Wizard displays the different installation paths for LumenRT components.
- (Optional) Make the desired configuration settings and return to the Installer Wizard main page.
- (Optional) To change the default Application Path, Content Path, or User Document Paths, click the Browse button next to the respective setting; then in the Browse For Folder dialog that opens, select the desired path and click OK.
- Click Next.
- (Optional) Modify the User Name of Company Name in the respective field.
- Click Done.
-
Click Next. The
Configuration
page opens.
-
To change the path of Delivered Configuration, click the
Browse button
next to the
Delivered Configuration field.
In the Browse For Folder dialog that opens, browse to the drive and folder where you want to deliver the default Configuration, then click OK. The location of Delivered Configuration should be from the local machine.
-
To set up Custom Configuration, select the
Custom Configuration (plus Delivered
Configuration) radio button. Then click the
Browse button
next to the
Custom Configuration field.
In the Browse For Folder dialog that opens, browse to the drive and folder where your Custom Configuration is located, then click OK. You can select a network location for Custom Configuration.
-
To change the path of Delivered Configuration, click the
Browse button
next to the
Delivered Configuration field.
- Click Next. The Features page opens.
- Follow steps 2 to 5 mentioned above.