To Place a Parametric Wedge

Select the Wedge Feature tool.
Enter a data point to define the start point.
Enter a data point to define the center point and radius for the wedge.
If Radius is on, this data point defines only location of the center point.
Enter a data point to define the sweep angle.
If Angle is on, this data point defines only the direction of the rotation.
Enter a data point to define the height.
If Height is on, this data point defines only the direction of the height dimension from the starting plane.

Placing a parametric wedge in an Isometric view, with all dimensions off and AccuDraw set to Top orientation. | Left: Define the starting point (1), the center point (2), and the sweep angle (3). | Right: Define the height (4).