To Fillet One or More Edges of a Solid or Projected Surface
Select the Fillet Edges tool.
In the Radius field, enter the required radius.
If required, turn on Select Tangent Edges.
Select an edge to fillet.
The solid highlights, with the selected edge highlighted.
Do one of the following:
Accept to fillet the edge.
or
Select further edges to be filleted using <ctrl+data points>.
Accept to fillet the edges.
Applying fillets to edges of a solid (Top) and a projected surface (Bottom). | Left: Select the edges (1 and 2), which highlight. Accept (3) to fillet the selected edges.
Effect of Select Tangent Edges setting. | Left: Off — only the selected section of the edge is selected for filleting. | Right: On — the selected section plus all edges that are tangentially continuous are selected for filleting.
