| Parameter type does not match directory record
|
The entity's parameter data does not match the type specified in
its directory record. The entity is ignored.
|
| Invalid Copious Data Format
|
A copious data (type 106) entity of a form not supported by
MicroStation was encountered. The
entity is ignored.
|
| Unsupported entity
|
An entity type in the IGES file is not supported and is therefore
omitted from the DGN file.
|
- String constant
broken before Hollerith character
- String field too
long
- Hollerith
character missing for string field
-
No field delimiter
|
These errors are caused by data that does not conform to the IGES
syntax specification. IGESIN attempts to infer or ignore the invalid data.
However, missing or incorrect geometry can result.
|
- Invalid directory
type
- Invalid PDS
Pointer in directory record
- Invalid directory
sequence
- Invalid PDS count
in directory record
|
These errors are caused by IGES files that are syntactically
correct but that contain data inconsistent with the IGES specification. In most
cases, IGESIN omits the erroneous entities and continues translating.
|
| Invalid line font (ignored)
|
An invalid line font was encountered. The default line style is
used for the entity.
|
| Subfigure
instance error
|
An error is encountered extracting the subfigure definition for
the specified instance. The instance is omitted from the DGN file.
|
| Unsupported conic form
|
An unsupported conic form is encountered.
MicroStation currently supports all
conic forms specified in the IGES standard, such as ellipses, hyperbolas, and
parabolas.
|
| Invalid hyperbolic conic
|
A degenerate hyperbola definition is encountered. No geometry is
generated in the DGN file for the conic entity.
|
| Invalid parabolic conic
|
A degenerate parabola definition is encountered. No geometry is
generated in the DGN file for the conic entity.
|
| Unable to standardize conic
|
The conic cannot be reduced to standard form through standard
rotation and translation of axis techniques. No geometry is generated in the
DGN file for the conic entity.
|
| Invalid revolution axis
|
The axis for a surface of revolution (type 120) is not a valid
line (type 110) entity. No geometry is generated in the DGN file for the
surface of revolution.
|
| Invalid entity pointer
|
An invalid entity pointer was encountered in the parameter data
for the indicated entity. The entity is ignored.
|
| Invalid viewing transformation
|
The transformation for a view entity is not orthonormal. The view
definition is ignored.
|
| Unable to create sheet file: <filename>
|
The specified sheet DGN file cannot be created because the
specified path does not exist, a write-protected file exists with the same
filename, or the file cannot be created for some other reason. The drawing
entity associated with this sheet is ignored.
|
| Unable to open sheet seed: <filename>
|
The sheet seed file specified by the
MS_SHEETSEED configuration
variable cannot be opened in the directory specified by
MS_SEEDFILES. Either the file does
not exist or read access is not available. The sheet DGN file is created by
copying the header or the model DGN file rather than using the sheet seed file.
|
| Invalid weight value
|
An invalid line weight value is encountered for the indicated
entity. The weight of the entity is set to zero.
|
| Subfigure name changed: <Subfigure_Name> =>
<Cell_Name>
|
The name of the IGES subfigure is altered to meet the
MicroStation requirement of
six-character alphanumeric cell names.
|
| Can't add cell to library
|
This error occurs if the active cell library is write-protected.
|
| Can't find section pattern <CODEnn>
|
A section pattern that is not in the cell library
"igespats.cel" is encountered. The section
pattern is ignored. You can correct this by creating a pattern cell for the
section and adding it to
"igespats.cel" with CODEnn as the cell name (nn
is the section code number).
|
| Unable to open pattern cell library
|
The pattern cell library
"igespats.cel" is not found. This library is
required for sectioned area entities (type 230). The configuration variable
MS_CELL is used to locate the
cell library. Be sure that
"igespats.cel" exists and that
MS_CELL points to its directory.
|
| Unsupported Associativity Form
|
An unsupported associativity form is encountered. The
associativity entity is ignored.
|
| Element off design plane
|
The geometry for an IGES entity is not included in the model plane
(volume in 3D) of the DGN file and is omitted. Usually this means that the
working units of the DGN file are not appropriate for the IGES file being
imported. You can correct this by choosing an appropriate seed file, adjusting
the working units in the Working Units dialog, or setting Translation Units to
Sub-Units or Calculate.
|
| Maximum cell size exceeded, Subfigure dropped to components
|
MicroStation supports a maximum
cell size of 65,000 words (1 word = 2 bytes). If an IGES subfigure exceeds this
limit, it is placed in the DGN file as individual components rather than as a
cell or shared cell.
|
| No UV Curve in Curve on Surface
|
A type 142 (curve on surface) entity is encountered with a zero
pointer for the UV curve entity. The curve is ignored. This usually causes a
trim boundary to be omitted from a surface.
|
| Unsupported Line font definition (304) form
|
An invalid form for a Line Font Definition entity is encountered.
The font definition is ignored.
|
