| Extrude Volume
|
Lets you extrude to a closed shape or mesh to a volume with
a flat bottom. The extrude distance is calculated from the lowest Z depth of
the selected element.
|
| Extrude To Target
|
Lets you extrude a closed shape or mesh element to a target.
The selected element must fully intersect the element from the Top view.
|
| Direction
|
(Extrude Volume option only) Sets the direction for
the extrusion.
- Global Z — Extrudes
the closed shape or mesh element in the Global Z direction.
- Vector — Extrudes
the closed shape or mesh element in the direction set by the cursor.
|
| Thickness
|
(Extrude Volume option only) If on, defines the
thickness from the lowest Z point of the closed shape or mesh element. If off,
the thickness value is entered with AccuDraw. A positive value projects in the
downward direction and a negative value projects in an upward direction.
|
| Full Dynamics
|
(Extrude Volume option only) If on, the result mesh
volume is drawn dynamically. If off, the mesh volume results will display after
placement. It is recommended when working with large mesh volumes Full Dynamics
be off.
|
| Keep Original
|
If on, the original element is retained. If the
element is in a reference file, the referenced element is retained. If off, the
original element is not retained and only the mesh volume is created.
|
| Create Outer Boundary LineString
|
(Available
only when Extrude Volume is selected) Creates a linestring that goes all around
the outer boundary of the meshed geometry. The linestring may jump vertically,
as needed.
|
Used to create a mesh
volume to form a base mesh volume or to create a mesh volume intersecting at a
target.
