Sphere Solid

(3D only) Used to place a spherical solid — a solid of revolution with a circular cross section.

You can access this tool from the following:

Ribbon: Modeling > Solids > Primitives
Toolbox: Primitive Solids

Setting	Description
Method	Sets the placement method. Center — Places the sphere starting at the center of the sphere by radius. Edge — Places the sphere by a distance described on the outer portion of the sphere. Diameter — Places the sphere from one side of the sphere along the diameter of the sphere.
Axis	Sets the direction of the sphere's axis. Points — Direction of axis is defined graphically. AccuDraw can be used to define the drawing plane on which the points are placed. Screen X, Y, or Z — Direction of the axis is set to the screen's X, Y, or Z axis. Drawing X, Y, or Z — Direction of the axis is set to the drawing's, or design file's, X, Y, or Z axis.
Radius	If on, sets the radius.
Diameter	If on, sets the diameter.

Key-in: PLACE SPHERE ICON

Note: Although the sphere's radius can be specified as a tool setting, it is generally quicker and easier to type the radius into the AccuDraw window.

Note: To place a volume of revolution with a non-circular cross-section, use the Solid by Revolution tool.