Cone Solid

(3D only) Used to place a solid cone.

You can access this tool from the following:

Ribbon: Modeling > Solids > Primitives
Toolbox: Primitive Solids

Setting	Description
Axis	Sets the direction of the cone's axis (height). Points (AccuDraw) — Direction of height is defined graphically. AccuDraw can be used to define the drawing plane on which the points are placed. Screen X, Y, or Z — Direction of the height is set to the screen's X, Y, or Z axis. Drawing X, Y, or Z — Direction of the height is set to the drawing's, or design file's, X, Y, or Z axis.
Orthogonal	If on, the cone is a right cone.
Top Radius	If on, sets the second radius.
Base Radius	If on, sets the first radius.
Height	If on, sets the height.
Variable Link	Let's you use an existing variable to set the input value, defined in the Variables dialog. Note: If no variables exist, you will be alerted to create one first.

Key-in: PLACE CONE ICON

Note: Although the cone's radii and height can be specified as tool settings, it is generally quicker and easier to type these distances into the AccuDraw window.

Note: This tool works similarly to the Cylinder Solid tool.