|Select Tangent Edges
||If on, edges that are tangentially continuous are selected and swept in one operation. If off, only the selected edge is swept.
|| Sets the type of feature.
- Cut — Cuts through the solid.
- Protrude — Extends the profile through and outside the solid.
|| Sets the behavior of the profile after the feature
- Hide - The profile
is associated with the feature to allow for later modification, but is not
visible. To use or modify the profile again, you will need to use
Show Input Element command from the
reset pop-up menu or the
Show Input Element tool.
- Show - The profile
is associated with the feature to allow for later modification and is visible.
This allows you to quickly reuse the same profile in another 3D operation.
Modifying the profile will affect both operations.
- Copy and Hide -
Hide; except that a copy of the profile
is made first, leaving the original profile unassociated. This allows you to
quickly reuse the same profile in another 3D operation that you do not wish to
be associated with the previous feature.