MicroStation CONNECT Edition Help

To Dimension an Element

  1. Select the Element Dimensioning tool ( Drawing > Annotate > Dimensioning ).

  2. Select the element to be dimensioned.
  3. Set the mode to Dimension Element.

  4. Enter a data point to define the extension line length and position the dimension.
    Note: Use the Show Sign for Zero property to turn on the display for sign symbol (+/-) when dimension tolerance is zero. The Show Sign for Zero property can be enabled from Drawing > Annotate > Dimensioning dialog launcher. To place a dimension with a leader, select Manual in the Location setting.

    Dimensioning an element