MicroStation CONNECT Edition Help

To Sweep One Section Profile Along Two Trace Curves

  1. Select the Swept Surface Along Curves tool ( Modeling > Surfaces > Create Surfaces > Extrude/Sweep > Sweep ).

  2. Select the Sweep One Along Two or Three icon in the tool settings.

  3. Select the first trace curve.
  4. Select the second trace curve.
  5. (Optional) Click and drag to use a selection line to select both trace curves.
  6. Select the profile.
  7. Enter a data point to preview.

    At this point the handles can be adjusted. Only the direction of the red arrow handles can be changed. Note in this case the profile does not have a handle.

  8. Enter a data point to accept or reset to reject.