配置 OpenPlant 工作区以发布带业务数据的模型
- 按以下顺序,将所有架构复制到一个文件夹并在此过程中跳过任何重复项:
- 根据需要将以下三个架构从 OpenPlant_Supplemental 重命名为 OpenPlant_PID_Supplemental 或 OpenPlant_3D_Supplemental:
- 按如下所示编辑每个重命名的架构并更改以下值:
- 对于所有其他补充架构,请确保它们指的是确切的主架构名称以及主版本和次版本。
-
对 OpenPlant 3D (SELECTseries 3) 架构完成此附加步骤 - 在 OpenPlant_3D_Supplemental_Units_Imperial.01.02.ecschema.xml 或(公制)架构中,请将以下行:
<ECProperty propertyName ="BEND_POINT_RADIUS" typeName ="double"> <ECCustomAttributes> <UnitSpecification xmlns="OpenPlant_CustomAttributes.08.11"> </ECCustomAttributes>
更改为
<ECProperty propertyName ="BEND_POINT_RADIUS" typeName ="double">