Accesses Accudraw
Commands.
You can access this tool from the following:
- Ribbon:
Layout >
Toggles Group >
Civil Accudraw button
Click on the Civil AccuDraw Tool icon to access AccuDraw
commands. Use Civil AccuDraw to allow precise input of points, whether the
points are physical points or end points of linear geometry. The Civil AccuDraw
values can be persisted as rules on the points by locking both values in the
Civil AccuDraw input.
Tools
Setting
|
Description
|
Toggle Civil
AccuDraw
|
Click the Toggle Civil AccuDraw icon to
activate or deactivate AccuDraw.
|
Shortcuts
|
Click the Shortcuts icon to access Civil
AccuDraw Settings dialog.
|
Distance and
Direction
|
Click the Distance and Direction icon to set the
order of ordinate entry to distance then direction, with both sharing a common
point of origin.
|
Dist-Dir
Unlinked
|
Click the Dist-Dir Unlinked icon to set the order
of entry to distance for the first ordinate then direction for the second
ordinate, without a common point of origin.
|
Dist-Dist
|
Click the Dist-Dist icon to set the order of
entry to distance for the first ordinate then distance for the second ordinate,
without a common point of origin.
|
XY
|
Click the XY icon to set the order of ordinate
entry to X-axis then Y-axis, with the two sharing a common point of origin.
|
DX DY
|
Click the DX DY icon to set the order of ordinate
entry to the difference in X coordinate then the difference in the Y
coordinate, with the two sharing a common point of origin.
|
Station-Offset
|
Click the Station-Offset icon to set the order of
ordinate entry to station identification then offset value, with both sharing a
common point of origin.
|
Note: These methods can be
configured. The above methods are those configured by default. These defaults
can be edited, removed, or additional methods may be added.