Flashlight / Cross Section |
Enables or disables Visual Explorer display and selects the display mode (Flashlight or Cross Section)
KEY-IN:
POINTCLOUDADV VISUALEXPLORER FLASHLIGHT
KEY-IN:
POINTCLOUDADV VISUALEXPLORER CROSSSECTION
|
Radius |
Sets radius in master units.
Tip: Dynamically measure on the point cloud by clicking on the Radius icon.
KEY-IN:
POINTCLOUDADV VISUALEXPLORER RADIUS
[ <Radius> ]
|
Height |
Sets height in master units.
Tip: Dynamically measure on the point cloud by clicking on the Height icon.
KEY-IN:
POINTCLOUDADV VISUALEXPLORER HEIGHT
[ <Height> ]
|
Settings |
Use to set colors for Forward, Backward and On-Plane regions and to set the Transparency and Thickness.
KEY-IN:
POINTCLOUDADV VISUALEXPLORER TRANSPARENCY
[ <Transparency> ]
|
Bold |
Enables\Disables bold highlighting on points recolored by the flashlight.
KEY-IN:
POINTCLOUDADV VISUALEXPLORER BOLD
<
ON
>
<
OFF
>
|
Change Visual Explorer |
Starts the change Visual Explorer mode to permit setting the direction with the following commands.
Action
|
Result
|
Space bar
|
Toggles the display of cone or cylinder.
|
Alt + left click
|
Rotates the Visual Explorer direction dynamically
|
R
|
Resets the Visual Explorer direction to be aligned with the view
|
C
|
Snaps the cursor on the point cloud along the view direction.
|
V
|
Determines whether the rotation is view dependent or not
|
Shift + mouse wheel
|
Changes the depth of the cursor along Visual Explorer direction – fast speed
|
Ctrl + mouse wheel
|
Changes the depth of the cursor along Visual Explorer direction – slow/accurate speed
Tip – assign pointcloudadv visualexplorer change key-in directly to a keyboard key such as F1 or F2 to easily start the Change Visual Explorer tool
|
Expand Clipping Planes
|
Use to expand the clipping planes.
|
KEY-IN:
POINTCLOUDADV VISUALEXPLORER CHANGE
|