Tools
ContextCapture provides various tools to ease the survey points acquisition: filters or sorts, display hints, etcetera.
Photos filter
Use these options to apply filters on the list of photos.
Status filters
This filter allows to select photos according to their status for the selected Survey point.
All
Display all photos
Disables filtering according to status for the selected survey point.
Potential Matches
Display only recommended photos, on which the selected survey point may be placed.
It uses the available positioning data of the block to find the photos.
Note: Incomplete block photos are not handled when using this selection mode.
ContextCapture takes advantage of the available block data, including the current survey data to improve potential matches estimation: on a calibrated scene, potential matches become more relevant after adding the first survey points (typically from the 4th).
In Use
Display only photos where a position is already registered for the selected survey point.
Sort
Two sorting modes are available:
- Alphabetical: photos are sorted by name, alphabetically.
- Distance from point: for a control point, closest photos are displayed first (ignoring rotation).
Filter by name
Allow to select photos by name.
Image display options
These options allow to control the content of the image view.
Show/hide all potential positions
Show the potential position of all survey points on the current photo.
For the selected survey point, the potential position is displayed with the placement marker (in yellow).
For other surveys points, the potential positions are displayed with orange markers.
Show/hide potential position of the current point
Enable epipolar lines display to highlight the potential matching region, or to check the survey point quality.