GIS-IDs: List of associated IDs on the GIS/data-source side.
Hyperlinks: Associate one or more web link, photo, word processing document, or other file with this element.
Pressure Drop (Typical): Pressure drop corresponding to the typical flow.
Flow (Typical): This is a typical (positive) flow through the orifice or valve.
Elevation: Elevation at centroid of junctions, valves, and pumps; the ground elevation at tanks; the hydraulic grade at reservoirs.
Concentration (Initial): Specify the initial concentration for the global concentration at the selected element.
Age (Initial): Specify the initial age of the fluid at the selected element.
Installation Year: Specify the install year of the element. It does not affect the calculations.
Trace (Initial): Specify the initial trace amount at the current location.
Zone: Specify the zone for the element.
Flow: Total flow through the orifice.
Headloss: Change in head across orifice.
Hydraulic Grade (From): Calculated hydraulic grade at the entrance of the orifice.
Hydraulic Grade (To): Calculated hydraulic grade at the exit of the orifice.
Pressure (From): Calculated pressure at the entrance of the orifice.
Pressure (To): Calculated pressure at the exit to the orifice.
Flow (Absolute): Magnitude of flow through the selected orifice.
Age (Calculated): Age at selected element for current time step.
Trace (Calculated): Trace at selected element for current time step.
Concentration (Calculated): Concentration at selected element for current time step.
Has Calculation Messages Now?: If true then the current element has associated calculation warning messages for the current time step.
Is Closed?: True if the current element is closed during the current time step.
Is Open?: Set to true if open during the current time step.
Is Initially Closed?: If true, the initial condition for the control element is "Closed" or "Off."
Controlled?: Is true if a control action in the current control set references the selected element.
Cannot Deliver Flow or Head?: If true then the cannot deliver head or cannot deliver flow warning was generated for the element for the current time step.
Head (Maximum, Transient): Maximum head at node over the course of the transient simulation.
Head (Minimum, Transient): Minimum head at node over the course of the transient simulation.
Pressure (Maximum, Transient): Maximum pressure at node over the course of the transient simulation.
Pressure (Minimum, Transient): Minimum pressure at node over the course of the transient simulation.
Air Volume (Maximum, Transient): Maximum air volume at node over the course of the transient simulation. Not applicable to Reservoirs and Rating curves.
Vapor Volume (Maximum, Transient): Maximum vapor volume at node over the course of the transient simulation. Not applicable to Reservoirs and Rating curves.
