GIS-IDs: List of associated IDs on the GIS/data-source side.
Hyperlinks: Associate one or more web link, photo, word processing document, or other file with this element.
Sinusoidal: If sinusoidal, then mean value, amplitude and phase are entered; otherwise, a table of values is required. A sinusoidal quantity X has the form: X = X0 + A sin( 2 * PI * t / T + Phase ).
Mean Value (Head): The mean head value. Required only if sinusoidal data specified.
Amplitude (Head): The amplitude of the sinusoidal head curve. Required only if sinusoidal data specified.
Phase: Phase of the sinusoidal flow or head curve. Default option is 0 such that periodic component of head or flow is zero at time zero.
Period: Oscillation period of the sinusoidal flow or head curve (must be positive), or the period after which a tabular flow or head pattern repeats.
Mean Value (Flow): The mean flow value. Required only if sinusoidal data specified.
Amplitude (Flow): The amplitude of the sinusoidal flow curve. Required only if sinusoidal data specified.
Transient Parameter: Choices: Head, Flow
Flow Pattern: A collection of time/flow pairs representing the transient flow pattern.
Head Pattern: A collection of time/head pairs representing the transient flow pattern.
Elevation: Elevation at centroid of junctions, valves, and pumps; the ground elevation at tanks; the hydraulic grade at reservoirs.
Trace (Initial): Specify the initial trace amount at the current location.
Zone: Specify the zone for the element.
Concentration (Initial): Specify the initial concentration for the global concentration at the selected element.
Is Constituent Source?: If true then the selected node can inject a set concentration of the global constituent into the system.
Pattern (Constituent): Specify the pattern which dictates how the injected constituent concentration varies over time.
Concentration (Base): This data field allows you to specify the corresponding constituent concentration at this node over time.
Mass Rate (Base): This data field allows you to specify the corresponding constituent mass rate at this node over time.
Age (Initial): Specify the initial age of the fluid at the selected element.
Discharge (Calculated): Calculated discharge from the node.
Pressure: Calculated pressure at node.
Pressure Head: Calculated pressure head at node.
Hydraulic Grade: Calculated hydraulic grade at node.
Age (Calculated): Age at selected element for current time step.
Trace (Calculated): Trace at selected element for current time step.
Concentration (Calculated): Concentration at selected element for current time step.
Has Calculation Messages Now?: If true then the current element has associated calculation warning messages for the current time step.
Head (Maximum, Transient): Maximum head at node over the course of the transient simulation.
Head (Minimum, Transient): Minimum head at node over the course of the transient simulation.
Pressure (Maximum, Transient): Maximum pressure at node over the course of the transient simulation.
Pressure (Minimum, Transient): Minimum pressure at node over the course of the transient simulation.
Air Volume (Maximum, Transient): Maximum air volume at node over the course of the transient simulation. Not applicable to Reservoirs and Rating curves.
Vapor Volume (Maximum, Transient): Maximum vapor volume at node over the course of the transient simulation. Not applicable to Reservoirs and Rating curves.
