In Bentley OpenUtilities Designer, the Profiles dialog provides a single UI for wastewater profiles.

The Create Profile dialog can be accessed through the menu item Wastewater > Utilities > Create Profile.

The Profiles dialog can also be accessed from the Utilities toolbar.

The order of features in the profile list is based upon the elevations from highest (upstream) to lowest (downstream) of the first features selected. This is determined from the Invert Elevation of the Manholes. After this first selection, additions connecting to the first point feature are inserted at the beginning of the list, and additions connecting to the last point feature are appended to the end of the list. The Station Numbers of the point features will reflect the same order. The first point feature's Station Number = "0+00" and the remaining Station Numbers increment based on their distance from the first point feature. When features are inserted at the beginning of the list, all of the Station Numbers are recalculated with the first point feature being set to "0+00".