You can add Depth vs. Area data to a wet well in your model. You define the Depth vs. Area curve for a wet well in the Wet Well Depth-Area Curve dialog box.

To add a Depth vs. Area curve to wet well:

1. Click a wet well in your model to display the Property Editor, or right-click a wet well and select Properties from the shortcut menu.
2. In the Physical section of the Property Editor, select Wet Well Depth-Area Curve in the Wet Well Boundary Type field. The Wet Well Depth-Area Curve field becomes available.
3. Click the Ellipses (...) button next to the Wet Well Depth-Area Curve field.
4. In the Wet Well Depth-Area Curve dialog box, each row in the table represents a point on the Wet Well Depth-Area curve. Type values for Depth and Area for each row. Click the New button to add a row or press the Tab key to advance to the next field in the table.
5. Perform the following optional steps:
6. To delete a row from the table, select the row then click Delete.
7. To view a report on the curve, click Report.
8. To view a plot of the curve, click Graph.
9. Click OK to close the dialog box and save your curve data in the Property Editor.

Wet Well Depth-Area Curve Dialog Box

This dialog box allows you to define Depth vs. Area tables for wet wells. The dialog box contains the depth-area table and the following buttons:

The table contains the following columns: