To Install Bentley Raceway and Cable Management

  1. In an Explorer window, double-click the Bentley Raceway and Cable Management setup executable.

    The Bentley Raceway and Cable Management Installation Wizard opens. Turn on the check box for accepting the End User License Agreement.

  2. To change the path where Bentley Raceway and Cable Management is installed click the Browse button next to the Application Path field.

    In the Browse For Folder dialog that opens, browse to the drive and folder where you want to install Bentley Raceway and Cable Management , then click OK.

  3. Optional: To do Companion Installations (Companion Feature or Companion Product) along with Bentley Raceway and Cable Management , do the following:
    1. Turn on the check box for the desired Companion Installation.
    2. Click Configure for the selected Companion Installation.

      The Installer Wizard displays the configuration settings for the selected Companion Installation.

    3. Make the desired configuration settings and return to the Installer Wizard main page.
  4. Optional: To make changes to the default Bentley Raceway and Cable Management Configuration:
    1. Click the Configure button next to Bentley Raceway and Cable Management 2024.

      The Configuration page opens.

    2. To change the path of Delivered Configuration, click the Browse button next to the Delivered Configuration field.

      In the Browse For Folder dialog that opens, browse to the drive and folder where you want to deliver the default Configuration, then click OK. The location of Delivered Configuration should be from the local machine.

    3. To set up Custom Configuration, select the Custom Configuration (plus Delivered Configuration) radio button. Then click the Browse button next to the Custom Configuration field.

      In the Browse For Folder dialog that opens, browse to the drive and folder where your Custom Configuration is located, then click OK. You can select a network location for Custom Configuration.

    4. Click Next.

      The Features page opens.

    5. In the Feature list, turn on or off the features, as desired.
    6. Click Next.
  5. Select the Datasets as desired and click Next.

  6. During the Upgrade option of the product, the following options Upgrade with Backup, No Action, Fresh Install with Backup and Fresh Install can be selected for each installed Dataset. Refer the following for Existing Dataset Action. Click Done.

  7. To read the End-User Licensing Agreement (EULA), click the Licensing Terms License Agreement link.

    The End-User Licensing Agreement opens in a web browser.

  8. After reading the license agreement, turn on the I accept the End User License Agreement check box if you understand and agree to the License Agreement Terms and Conditions.

    Note that agreeing to the license agreement is required in order to install the product. Turning on the check box displays the Configure and Install buttons at the bottom of the wizard.



  9. Click Install.
  10. Click Finish.

    A program group is created for this product. If you chose to use the Product Activation Wizard in the previous step, it opens.