Advanced Unit Settings Dialog
Contains controls for setting the resolution of the design environment, which sets its size and accuracy.
- Design File Settings dialog: select Working Units and then click the Edit button

| Setting | Description |
|---|---|
| Unit Type | Determines if the units in this design file are
units of measurement or some unit-less representation.
|
| Resolution | Determines the accuracy of the design plane/cube.
Solids Working Area (SWA) is a scale of measurement applicable to the size of
solids that converts UORs (Unit of Resolutions, Unit that MicroStation
understands) to Solid Kernel Coordinate Unit (i.e. in meters, the unit that the
Parasolid kernel understands).
Standard MicroStation value is 10000 UOR/m. Caution: Changing the Resolution setting,
changes the size of existing geometry in the model.
|
| Working Areas (each axis) | Displays the length of each axis of the working environment (expressed in Miles or Kilometer when Unit Type is Distance) depending on the resolution. This area is recalculated, automatically, if the resolution is changed. |
| Working Areas (Solids) | This setting is required by the Parasolid solids
modeling engine used by the product. It defines an upper bound that limits the
extents of any single solid such that it can be modeled to a fixed precision.
This precision value is displayed in the Advanced Unit Settings dialog as
“Solids Accuracy”.
For best results:
This will set the Solids Accuracy to 1E-08, which also is the Parasolids default. If you then make any changes to the Resolution setting, changing the Solids value back to 1 Kilometer will restore the Solids Accuracy to 1E-08. When you first access the parametric feature tools, in a model for which the Solids Accuracy has not been set, an alert box appears to notify you that the Solids Accuracy of the model can be improved. It gives you options to update the setting, leave as is, or do nothing for the current session (so that the alert will appear in a future session with the same model). When working with parametric elements or features, the Parasolid engine deals with precision issues as follows: All calculations for solids are performed to fixed accuracies called the session precision and session angle precision. In the product's environment, session precision equates to Solids Accuracy, which is determined from both the Resolution setting and the Solids setting in the Advanced Unit Settings dialog. Because solids modeling is very precise, it is important that design data is constructed at an accuracy that is at least as accurate as that required by the solids. With solids modeling:
If possible, in order to enhance the reliability of solids, it is also recommend that you do not construct solids with geometry dimensions at or near to the linear and angular precisions. That is:
|