To Pre-Check Auto Routing Entry Points
Auto routing entry
points are used to select raceway in equipment's proximity that will be
considered for cable routing. This procedure describes how to check the
selected cables in respect to their connected equipment and their Auto Routing
Entry Points to determine if there will be any problems when Auto Routing the
entry points.
- In the Cable Manager select all cables .
- Select the Pre-Check Auto Routing Entry Points option from the Ribbon menu.
- The following version of the Auto Routing Entry Points dialog displays listing only equipment with connection failures referring to their current cable connections.
- In the example above only two equipment components are shown. Both have cable connections for CTRL and LV, but equipment PR2 is shown only with the CTRL connection, because there currently is a connection to the routing model for LV cables.
- Right-click on the equipment component and click Visualize to isolate the component in the drawing.
Once any potential
routing failures have been identified, you can refer to the
To
Define or Correct Auto Routing Entry Points topic for details on how to
fix the routing errors.