|
Select
|
Changes your mouse cursor into a
selection tool. The selection tool behavior varies depending on the direction
in which the mouse is dragged after defining the first corner of the selection
box, as follows: If the selection is made from left-to-right, all elements that
fall completely within the selection box that is defined will be selected. If
the selection is made from right-to-left, all elements that fall completely
within the selection box and that cross one or more of the lines of the
selection box will be selected.
|
|
|
|
|
Layout
|
Changes your mouse cursor into
a network layout tool. Right-click to change the type of element and the type
of link. Pressure Pipe— Lets you place an element through which water moves
under pressure. Pressure pipes typically discharge from a pumping station
located upstream in the sewer collection system. Conduit —Lets you place a
closed section element through which water moves. A conduit has a constant
roughness and cross section shape along its entire length. Available conduit
shapes consist of both open and closed cross sections.
|
|
Manhole
|
Changes your mouse cursor into
a manhole element symbol. Clicking the left mouse button while this tool is
active causes a manhole element to be placed at the location of the mouse
cursor.
|
|
Transition
|
Changes your mouse cursor into
a transition element symbol. Clicking the left mouse button while this tool is
active causes a transition element to be placed at the location of the mouse
cursor.
|
|
Catchment
|
Changes your mouse cursor into a
catchment element symbol. When this tool is active, click in the drawing pane
to begin drawing a polygon that represents the catchment.
|
|
Low Impact Development Control
|
Changes your mouse cursor into
a LID control element symbol. When this tool is active, click in the drawing
pane to begin drawing a polygon that represents the LID control.
|
|
Pond
|
Changes your mouse cursor into
a pond element symbol. When this tool is active, click in the drawing pane to
begin drawing a polygon that represents the pond.
|
|
Pond Outlet Structure
|
Changes your mouse cursor into
a pond outlet structure element symbol. Clicking the left mouse button while
this tool is active causes a pond outlet structure element to be placed at the
location of the mouse cursor.
|
|
Pump
|
Changes your mouse cursor into
a pump element symbol. Clicking the left mouse button while this tool is active
causes a pump element to be placed at the location of the mouse cursor.
|
|
Wet Well
|
Changes your mouse cursor into
a wet well element symbol. Clicking the left mouse button while this tool is
active causes a wet well element to be placed at the location of the mouse
cursor.
|
|
Pressure Junction
|
Changes your mouse cursor into
a pressure junction element symbol. Clicking the left mouse button while this
tool is active causes a pressure junction element to be placed at the location
of the mouse cursor.
|
|
Pump Station
|
Changes your mouse cursor into a
Pump Station element symbol. When this tool is active, click in the drawing
pane to begin drawing a polygon that represents the pump station.
|
|
Variable Speed Pump Battery
|
Changes your mouse cursor into
a variable speed pump battery element symbol. Clicking the left mouse button
while this tool is active causes a variable speed pump battery element to be
placed at the location of the mouse cursor.
|
|
Air Valve
|
Changes your mouse cursor into
an air valve element symbol. Clicking the left mouse button while this tool is
active causes a air valve element to be placed at the location of the mouse
cursor.
|
|
Border
|
Changes your mouse cursor into
a border symbol. When the border tool is active, you can draw a simple box in
the drawing pane using the mouse. For example, you might want to draw a border
around the entire model.
|
|
Text
|
Changes your mouse cursor into a
text symbol. When the text tool is active, you can add simple text to your
model. Click anywhere in the drawing pane to display the Text Editor dialog
box, which lets you enter text to be displayed in your model.
|
|
Line
|
Changes your mouse cursor into
a line symbol. When this tool is active, you can draw lines and polygons in
your model using the mouse.
|