| Level of Detail
|
Shows the resolution. Higher level of detail means
higher resolution and smoother surfaces.
|
| Result
|
Allows you to select the type of mesh output. Options
are:
- Volume - Creates a
volume mesh around element. In case of hollow elements, wraps mesh around the
element.
- Surface - Creates a
surface mesh around element. In case of hollow elements, wraps mesh such that
the open faces are closed.
Shrinkwrapping a hollow element:
Left - Original element | Center - Level of Detail = 8, Result = Surface, Keep
Original = On, Skip Simplification = Off | Right - Level of Detail = 8, Result
= Surface, Skip Simplification = On
Left -
Original element | Center - Level of Detail = 5, Result = Volume, Create Thick
Shell = On, Outer Thickness = 5, Inner Thickness = 2, Keep Original = On, Skip
Simplification = Off | Right - Level of Detail = 5, Result = Volume, Create
Thick Shell = On, Outer Thickness = 5, Inner Thickness = 2, Keep Original = On,
Skip Simplification = On
|
| Create Thick Shell
|
If on, applies a thickening to the mesh before
shrinkwrapping. If off, parts of the mesh that are detected as surface instead
of volume, will be considered as artifacts and removed.
|
| Outer Thickness
|
(Available only when
Create Thick Shell is on) Thickness is
applied on the outer side of the mesh based on specified value.
|
| Inner Thickness
|
(Available only when
Create Thick Shell is on) Thickness is
applied on the inner side of the mesh based on specified value.
|
| Keep Original
|
- Off - Deletes the
original element after shrinkwrapping.
- On - Keeps the
original element after shrinkwrapping.
|
| Skip Simplification
|
- Off - (Default)
creates a simple mesh with fewer facets.
- On - creates a non
simplified quad mesh.
|
This tool is used to create a
watertight mesh around elements.
