Set Lintel command settings group |
The following settings are available when the Set Lintel command is selected.
- Lintel type option menu — Sets the lintel type. Six groups of lintel type settings are managed. The settings for each type are stored in a settings file (*.frs).
- Minimum Bearing: — Sets the minimum bearing value of the lintel. When a frame is composed of different sub-frames, a lintel is added to one of the sub-frames while the specified bearing is applied to span the other sub-frame(s).
- Rounded To: — The Minimum Bearing setting is rounded to this value.
- Minimum Height: — Sets the height of the lintel.
- Rounded To: — The Minimum Height setting is rounded to this value.
- Overhang Front; Overhang Back: — Determines the overhang distance (front; back) from the face of the wall to the lintel face.
Note: Set Lintel is used in conjunction with the Add Lintel command.
|