Accessories
|
LPG_GasMeter "Default"
|
LPG Gas Meter — The LPG Flow Meter provides
accurate readings of the flow with an absolute ease. Flowing gas is accelerated
and conditioned at straightening vanes in the meter and the dynamic forces of
flow to the turbine wheel rotate the rotor attached to the display.
|
LPG_GasDetectorRelay "default"
|
LPG Gas Detector Relay — A protective
device that gives an early indication of faults occurring in oil-filled
conservator type power transformers. LPG gas alarm with relay output, to
operate gas solenoid valves, link to systems or sound remote alarms. Fitted
with short wiring tails and supplied with box for installation purposes. Input
terminals for remote gas cut-off or alarm purposes.
|
LPG_Adapter "Adapter"
|
LPG Adapter — Straight Stem adapter fitting
holds a filler nozzle adapter allowing the grooves to pass over when refilling
gas tank.
|
LPG_CompressionReducingSets "Default"
|
LPG Compression Reducing Sets — Compression
reducers used in plumbing and LPG conduit systems to join two tubes or pipes
together, under extensively for hot and cold flow, providing leak tight seals.
|
LPG_CompressionReducingCouplers "Default"
|
LPG Compression Reducing Couplers —
Compression fitting allows reducing the flow by coupling two pieces of pipe of
different diameter.
|
LPG_CompressionEqualCouplers "Default"
|
LPG Compression Equal Couplers —
Compression fitting allows adjusting the length or rotation of two pieces of
pipe.
|
LPG_SingleUnion "Default"
|
LPG Single Union — A union allows a
connection in a pipe that can be opened up for service and then closed back up
for a water tight seal.
|
LPG_FlareDoubleUnion "Default"
|
LPG Double Union — A double union
compression nut that connects gas pipes at both ends.
|
LPG_Plug "Plug"
|
LPG Plug — Drain plug to secure on the gas
container, usually the tank outlet.
|
LPG_Bush "Bush"
|
LPG Bush — Hex pin connector fitting for
gas piping socket end caps.
|
LPG_Nipple "ReducingNipple"
|
LPG Reducing Nipples — Solid brass pipe
adapter with end fitting with tightening hex wrench.
|
LPG_Solder "DoubleUnion
|
LPG Solder Double Union — Female union
fitting for connecting with pressure regulator.
|
LPG_Solder "SingleUnion"
|
LPG Solder Single Union — Union fitting
with one compression end, used for pressure regulator
|
LPG_FemaleUnion "Default"
|
LPG Female Union — Straight female union
connector fitting with other compression end suitable to connect branched pipe
or gas meter.
|
LPG_SpecialCompressionHobFittings "Default"
|
LPG Special Compression Hob Fittings —
Special fittings, such as compression x Bspfm hob fitting with hex compression
end for use with gas hobs, usually sealed with the use of the special fiber
washer.
|
LPG_CopperOlives "Default"
|
LPG Copper Olives — Pipes must be joined
by LPG compression fittings, using copper olives inside the cone nuts.
|
LPG_CompressionStopEnds "Default"
|
LPG Compression Stop Ends — Dead nut
suitable to fix at the end of gas pipes.
|
LPG_CapNut "Default"
|
LPG Cap Nut — Hexagonal cap nut ideal for
tight seal in tubing mechanism.
|
LPG_FlareNuts "Default"
|
LPG Flare Nut — Add on accessory designed
to fit outlet valves suitable in fill line of gas feed. Used to flare the end
of pipe in order to connect it to the outlet valve on a multi-hole tank.
|
LPG_Elbow "Male_Elbow"
|
LPG Male Elbow — Elbow with branches fixed
at 90 degree, end 1 is set default to male.
|
LPG_Elbow "Female_Elbow"
|
LPG Female Elbow — Elbow with branches
fixed at 90 degree, end 1 is set default to female.
|
LPG_Elbow "Union_Elbow"
|
LPG Union Elbow — Elbow with branches fixed
at 90 degree, both ends are set default to compression.
|
LPG_CompressionElbow "default"
|
LPG Compression Elbow — Elbow with 45/90
degree angle. Both branches can have compression ends.
|
LPG_CompressionxBspm "Default"
|
LPG Compression x Bspm — British Standard
Pipe (BSP) male joint fittings comprises of Body, Nut, and Retainer that
connects the gas line to a manifold or gas outlet with female thread.
|
LPG_CompressionxBspfm "Default"
|
LPG Compression x Bspfm — Brass Compression
Elbow x Bsp female fitting suitable for use in oil and low pressure gas
distribution, withstanding above ground hot and cold water services and heating
installations.
|
LPG_CompressionElbow "Bspm"
|
LPG Compression Elbow x Bspm — Compression
Elbow x Bsp male with a compression end branched in angle 45/90.
|
LPG_CompressionElbow "Bspfm"
|
LPG Compression Elbow x Bspfm — Compression
Elbow x Bsp female with a compression end branched in angle 45/90.
|
CompressionElbow "Bspm"
|
LPG Compression x Bspm Type2 — Angular,
compression Elbow x Bsp male elbow with a compression end.
|
CompressionElbow "Bspfm"
|
LPG Compression x Bspfm Type2 — Angular,
compression Elbow x Bsp female with a compression end.
|
LPG_ElbowExtruded "ElbowExtruded"
|
Elbow Extruded — Branch in 90 Degree
Extruded bar Street Elbow Male and Female type is ideal for connecting lines
for LP gases withstand high pressure flow. End can be set to function
compression.
|
LPG_Tee "CompressionEqual"
|
Compression Equal Tee — Compression end
fitting for use on copper pipe, suitable for gas as well as central heating.
When using barrier pipe, the tee can be used with pipe inserts both ends.
|
LPG_Tee "CompressionReducing"
|
Compression Reducing Tee — Compression
fitting consisting of a body with a built in stop for receiving the tube, a
compression olive the same size as the pipe and a compression nut. The nut is
then tightened, which compresses the olive onto the pipe creating the joint.
|
LPG_Tee "Female"
|
Female Tee — Fitting with female end
connection ideal for connecting gas pipes at ends of the tee.
|
LPG_ThreeWayTee "default"
|
LPG Three-Way Tee — LPG Gas Compression tee
pipe fitting connector with compression ends ideal for connecting more than one
regulators or bifurcating supply at the juncture.
|
Valves
|
LPG_BallValves "default"
|
LPG Ball Valve — Gas Ball Valve comprises a
brass ball and stem with both compression ends completes a perfect shutoff for
all gas systems. It is light, compact and easy to install and operate using the
wrench handle. Ideal for gas distribution. It is leak resistance and reduced
risk of damage from over tightening.
|
LPG_GasShutOffValve "Default"
|
LPG Gas Shut Off Valve — Shut off valve for
on-off control of fuel gas in commercial and industrial gas burners. Unique
double disc design with over-travel provides redundant sealing for leak tight
shutoff. Flange adapters are provided for ease of installation and service
|