Access Doors
|
BMV_RectangularFlatAccessDoor "Flat Panel" Default
|
Access Door - Flat Panel — The moderate
sheet thickness panel fits on a surface of rectangular duct. The door can be
set hinged or with cam.
|
BMV_RectangularStdAccessDoor "Standard Rectangular"
Default
|
Access Door - Standard Rectangular — The
thickness adds strength to the panel, give way to a standard rectangular access
door suitable to fit on rectangular ducts. The door can be set hinged or with
cam.
|
BMV_RectOvalAccessDoor "Flat Oval" Default
|
AccessDoor - Rectangular Flat Oval — The
oval shape flat panel gives smooth edge advantage over cornered door. Flat oval
design optimizes access area and simplifies installation. Attachment available
as hinged or with cam.
|
Flat Panel" Default
|
Access Door - Radius Flat Panel — The
moderate sheet thickness roll-formed door pane fits on a surface of round duct.
The door can be set hinged or with cam.
|
"Radius Flat Oval" Default
|
Access Door - Radius Flat Oval — Flat oval
access panel provide easy access into air ducts and units. The thickness adds
strength to the panel, give way to a oval access door suitable to fit on round
ducts. The door can be set hinged or with cam.
|
"Radius Pressure Relief" Default
|
Access Door - Radius Pressure Relief —
Pressure relief access doors are designed for use in low to medium pressure
duct systems. They provide a means of gaining access to damper components
inside the ductwork. Assures a tight seal without obstruction in the air
system.
Attachment available as hinged or with cam.
|
BMV_OvalAccessDoor "Flat Panel" Default
|
Access Door - Oval Flat Panel — The
moderate sheet thickness rectangular door pane fits on a surface of oval duct.
The door can be set hinged or with cam.
|
BMV_OvalAccessDoor "Standard Rectangular" Default
|
Access Door - Oval Standard Rectangular —
Flat rectangular access panel provide easy access into air ducts and units. The
thickness adds strength to the panel, give way to an access door suitable to
fit on oval ducts. The door can be set hinged or with cam.
|
BMV_OvalAccessDoor "Flat Oval" Default
|
Access Door - Oval Flat Oval — Oval access
doors are designed for use in low to medium pressure duct systems. They provide
a means of gaining access to damper components inside the ductwork. Assures a
tight seal without obstruction in the air system.
Attachment available as hinged or with cam.
|
Adaptors
|
RectAdapter Default
|
Rectangular Adapter — Used to line up with
the duct extension.
|
RectangularCap Default
|
Rectangular Cap — Cap can have a handle
when the Cap Type property is set to 1.
|
RectCoupling Default
|
Rectangular Coupling — Couples up two
straight ducts. Economical over elbow
|
RectFlexConnection Default
|
Rectangular Flex Connection — This
component acts as a vibration isolation fitting.
|
RoundAdapter Default
|
Round Adapter — Used to extend ductwork by
connecting round ducts in a line.
|
RoundCap Default
|
Round Cap — Cap fitting used to cover up
the duct terminal. It can have a handle when the Cap Type property is set to 1.
|
RoundCoupling Default
|
Round Coupling — Coupling connects two
round ducts laid in a straight line. Advantageous over elbows.
|
RoundFlexConnection Default
|
Round Flex Connection — This component acts
as a vibration isolation fitting.
|
OvalAdapter Default
|
Oval Adapter Default — Used to extend
ductwork by connecting oval ducts in a line.
|
OvalCap Default
|
Oval Cap — Cap fitting used to cover up and
close the duct terminal. It can have a handle when the Cap Type property is set
to 1.
|
OvalCoupling Default
|
Oval Coupling — Coupling connects two oval
ducts laid in a straight line. Advantageous over elbows.
|
OvalFlexConnection Default
|
Oval Flex Connection — This component acts
as a vibration isolation fitting.
|
Elbows
|
RectangularElbow DefaultRect
|
Rectangular Elbow — Rectangular Elbow
Radius elbow that connects two rectangular ducts in a given angle. The
auto-fitting option connects the ducts when the run is deviated in an angle.
The custom defined vanes inside the elbow controls the air flow.
|
RectangularElbow Mitered
|
Rectangular Elbow Mitered — Joining of two
equal duct segments in an angle forms a mitered elbow. A true miter bend is a
90 degree bend made by cutting two pieces at 45° and joining together.
|
RectangularElbow RadiusThroatSquareHeel
|
Radius Throat Square Heel Elbow — Square
heel elbows with radius throat fittings are best suited in rectangle turns.
|
RectangularElbow SquareThroatRadiusHeel
|
Square Throat Radius Heel Elbow — Radius
heel elbows with square throat.
Use of square throat elbows and tees in ductwork promote a
more uniform airflow and reduced turbulence, when associated with turning vanes
. The square throat tee eases branching out flow in a desired angle in
rectangular duct routing.
|
RectangularTee Default
|
Rectangular Tee — Rectangular duct splitter
tee to connect a main duct with two branches of duct in angle.
|
SquareThroatTee "Default"
|
Square Throat Tee — A square throat tee
advantages branching out flow in a desired angle in rectangular ductwork.
|
SideBranch "Rectangular Side Branch"
|
Rectangular Side Branch — Rectangular duct
side branch fitting provided with an end connection to connect duct segment
branched out in an angle.
|
RoundElbow DefaultRound
|
Round Elbow — A radius elbow for connecting
round ducts in an angle. Suitable in installation of duct-out hoods.
|
RoundElbowMitre "Mitre Elbow"
|
Round Elbow Mitre — Curved elbow formed by
connecting separate sections called gores formed by defining the Number of
Mitres property that in turn controls angle of each segment.
|
SegmentedBend2 "Segmented Bend End Segment"
|
Segmented Bend End Segment — Placing
Segmented Bend End Segment elbows with an offset between its outlets eliminates
the need to use a combination of fittings when routing through tight spaces.
Segmented Bend End Segment elbow connects two offset ducts. For example, set
the value of "Offset" property to alter elbow's second outlet is offset
accordingly.
|
SegmentedBend "Segmented Bend"
|
Segmented Bend — Segmented elbows provide
more flexibility when routing round duct systems.
|
OvalElbow DefaultOval
|
Oval Elbow — The angular elbow fitting
formed with number of segments connecting in a defined angle.
|
Transitions
|
RectangularTransition "Centric Reducer"
|
Rectangular Transition — Allows for a
change in duct size to meet air flow requirements of the system, or to adapt to
existing duct of a different size.
|
RectRndTransition RectToRnd
|
Transition Rectangular To Round — Allows
connecting a rectangular duct to a round duct in the straight path of duct
flow.
|
RectOvalTransition RectToOval
|
Transition Rectangular To Oval — Allows
connecting a rectangular duct to an oval ductwork or stack .
|
RectOgee Ogee
|
Rectangular Ogee — Ogee provides a way to
connect offset duct routes. This fitting is not catalog driven as these types
of offsets usually require a fabricated piece.
|
RoundTransition "Centric Reducer"
|
Round Transition — Round transition allows
connecting a round duct run to another duct of different diameter.
|
RectRndTransition RectToRnd
|
Transition Rectangular To Round — This
transition allows connecting a round duct run to rectangular duct of different
duct size, as required
|
RoundOffset Default
|
Round Offset — The round offset allows
connecting two parallel ducts or duct and duct fittings in a large ductwork and
routes. The round offset adds duct transition and aids in connecting two
parallel ducts or duct and duct fittings with a desired rise value set.
|
OvalTransition "Centric Reducer"
|
Oval Transition — Oval transition allows
connecting an oval duct run to another duct of different duct size.
|
OvlRndTransition "Oval Round"
|
Transition Oval To Round — Oval to round
transition allows connecting an oval duct run to a round duct of different duct
size.
|
RectOvalTransition RectToOval
|
Transition Rectangular Duct To Oval — This
transition allows connecting an oval duct run to rectangular duct of different
duct size, as required.
|
OvalOffset Default
|
Oval Offset — The oval offset allows
connecting two parallel ducts or duct and duct fittings in a large ductwork and
routes. The oval offset adds transition and aids in connecting two parallel
ducts or duct and duct fittings with a desired rise value set.
|
connectors - wyes
|
RectangularWye Default
|
Rectangular Wye — A rectangular fitting
that connects the main segment duct with two branches of rectangular ducts.
Either or both the branch angles can be set to 90° or less. The radius of
branches manage the curved segments.
|
Trouser Trouser
|
Rectangular Trouser — The trouser fitting
branches out two end segments spaced apart with an offset value. Each straight
branch used to connects to a rectangular duct.
|
RectBreech Breech
|
Rectangular Breech — A 3 way rectangular
fitting that connects the main segment duct with two branches of rectangular
ducts. Ether or both the branch angles can be set to 90 degrees or less.
|
SquareThroatCross "Square Throat Cross"
|
Square Throat Cross — A square throat cross
fitting facilitates connecting two straight ducts at their intersection keeping
the duct segments in same plane. In place of ducts, the ends may have one or
more terminal equipments connected in the route.
|
RadiusThroatCross "Radius Throat Cross"
|
Radius Throat Cross — A radius throat cross
fitting facilitates connecting two straight ducts at their intersection keeping
the dusts in same plane. The radius at each branch controls the angular
displacement of the cross ends.
|
ThreeWayTee "Three Way Tee"
|
Rectangular Cross — A three way tee fitting
that incorporates a straight reducer and two side angular branches to connect
rectangular duct segments.
|
RectNestedTee "Rectangular Nested Tee"
|
Nested Fitting — A nested tee fitting
provides connecting capability of connecting a duct to multiple rectangular
branches and terminal equipments.
|
RoundTee RoundTee
|
Round Tee — Tee branches out an end
connection to connect to a round duct.
|
ConicalTee "Conical Tee"
|
Conical Tee — Reducing airflow tee fitting
in round ductwork .
|
SaddleTee "Saddle Tee"
|
Saddle Tee — A snap tee, used to quickly
add on existing duct to connect a branched outlet.
|
RoundWye "Round Wye"
|
Round Wye — These "Y" shaped ducting
components transition from one round duct into two round ducts.
|
RoundTrouser "Round Trouser"
|
Round Trouser — Round trouser fitting
branch out two end segments spaced apart with an offset value. Each end is used
to connect to round duct .
|
RoundBreech "Round Breech"
|
Round Breech — A 3 way round breech
connects the main segment duct with two branches of round ducts in the angle 90
° or less.
|
RoundThreeWay "Three Way"
|
Round Three Way Wye — A round fitting with
one inlet and two branch outlets of uniform size placed at default 45° to
inlet. Though, the angles can be manipulated per requirement of flow.
|
OvalTee OvalTee
|
Oval Tee — Flat oval trouser fitting branch
out two end segments spaced apart with values defined for top and right
offsets.
|
OvalTrouser "Oval Trouser"
|
Oval Trouser — Flat oval trouser fitting
with lateral branch.
|
OvalWye "Oval Wye"
|
Oval Wye — Flat Oval Wye fitting with
lateral cross, branched in a given angle.
|
OvalCross "Oval Cross"
|
Oval Cross — A three way oval cross fitting
that incorporates a straight reducer and two side angular branches to connect
oval duct segments.
|
OvalReducerCross ReducerCross
|
Oval Reducer Cross — Flat Oval Wye fitting
with two branched conical cross.
|
takeoffs
|
RectRectTap "Rect Tap"
|
Rectangular Tap — The outlet of the tap
connects to the rectangular branch duct for down streaming of the air.
|
RectOvlTakeoff RectToOvl
|
Takeoff Rectangular To Oval — Useful where
small portion of the flow needs to be diverted in the oval branch duct.
|
RectRndTakeoff RectToRnd
|
Takeoff Rectangular To Round — Allows
fitting to be mounted to Rectangular duct with improved air flow. Used for
transition from air plenums or rectangular duct to round pipe or insulated
duct.
|
RectRoundTap "Round Tap"
|
Round Tap On Rectangular Duct — Used for
transition from rectangular duct to round pipe or insulated flexible duct.
Adjustable inclined angle. Useful when branch ducts are to be located within a
joist space.
|
RectOvalTap "Oval Tap"
|
Oval Tap On Rectangular Duct — Used for
transition from rectangular duct to oval pipe or insulated flexible duct.
Adjustable inclined angle. Forms a transition from rectangular to oval branch
duct.
|
RectangularTakeoff Angled
|
Rectangular Angled Takeoff — Angled takeoff
routes can be connected with fitting having rectangular inlets.
|
RectangularTakeoffRadius "Radius 1"
|
Rectangular Takeoff Radius 1 — The angular
curvature of the side of the branch is controlled with the value of primary
radius.
|
RectangularTakeoffRadius "Radius 2"
|
Rectangular Takeoff Radius 2 —
Additionally, the secondary radius defines the curvature of another side of the
branch.
|
RectangularTakeoffRadius "Radius 3"
|
Rectangular Takeoff Radius 3 — Both radius
values define the curvature of sides of branch.
|
RndTakeoff Default
|
Round Takeoff — Round takeoff branching
straight on the wall of round duct.
|
RndTakeoff Conical
|
Round Conical Takeoff — Round conical
outlet branched out perpendicular to the wall of round duct. The outlet
diameter determines the reducing effect in the conical branch, thereby maintain
the flow of different pressure conditions. Suitable for connecting HVAC
equipments, like VAV in the round and rectangular duct routes.
|
RoundRoundTap "Round Tap"
|
Round Tap — Round tap outlet branched out
in an inclined angle on the wall of round duct.
|
SaddleTap Tap
|
Saddle Tap/TakeOff — Saddle Take Off useful
for remodeling. Used for starting branch duct runs from round pipe trunk or
branch lines in HVAC air duct systems.
|
RndRectTakeoff RndToRect
|
Takeoff Round To Rectangular — Rectangular
takeoff branching straight on the wall of round duct, used to connect fittings
in the air handling system.
|
RoundRectTap "Rect Tap"
|
Rectangular Tap on Round Duct — Rectangular
takeoff branching out in an inclined angle on the wall of round duct.
|
RndOvlTakeoff RndToOvl
|
Takeoff Round To Oval — Takeoff branching
an oval outlet on the wall of round duct.
|
RoundOvalTap "Oval Tap"
|
Oval Tap on Round Duct — Oval tap outlet
branched out in an inclined angle on the wall of round duct.
|
OvlTakeoff Default
|
Oval Takeoff — Oval takeoff branching
straight on the wall of oval duct.
|
OvalOvalTap "Oval Tap"
|
Oval Tap — Oval tap outlet branched out in
an inclined angle on the wall of oval duct.
|
OvlRndTakeoff OvlToRnd
|
Takeoff Oval Duct To Round — Round takeoff
branching straight on the wall of oval duct, used to connect fittings having
round inlets.
|
OvalRoundTap "Round Tap"
|
Round Tap on Oval Duct — Round takeoff
branching out in an inclined angle on the wall of oval duct.
|
OvlRectTakeoff OvlToRect
|
Takeoff Oval Duct To Rectangular Branch —
Rectangular takeoff branching straight on the wall of oval duct, used to
connect fittings in the air handling system having rectangular inlets
|
OvalRectTap "Rect Tap"
|
Rectangular Tap on Oval Duct — Rectangular
tap outlet branched out in an inclined angle on the wall of oval duct.
|