AECOsim Building Designer Help

To place a building section callout with a multipoint leader and continuous leader line

  1. Select the Place Building Section Callout tool.
  2. In the tool settings window, key in the callout information.
  3. Turn on Leader Type to draw a continuous leader line.
  4. Click the arrow at the bottom of the tool settings window and select Multipoint leader.
  5. Enter a data point to place the section callout and set the starting point for the leader line. The starting point is identified with the first data point. Leader extensions are placed with successive data points.
  6. Continue to place data points for additional leader line extensions.
  7. Reset to complete placement of the multipoint leader line and to locate the second callout.
  8. Move the pointer to rotate the symbol to the desired direction, then enter a data point to finish placing the second building section callout.


Parent topic: Place Building Section Callout tool